A Lidar-Based Tree Canopy Detection System Development
【摘要】：In this paper, a Li DAR-based interactive target detection system was developed to characterized tree canopy structures under various laser sensor travel speed and detection distances. The system composed of a sliding motion control system and a Lidar-based target detection unit. The target detection unit used a 2700 range laser scanning sensor to measure target object surface distances based on the time-of-flight principle. The laser sensor travel speed and travel distance was controlled via the control system by specifying a position and speed as a set point. A real-time data acquisition and data post-processing programs were developed based on C++ and MATLAB programming languages respectively. The entire system was tested in the laboratory for a wide range of parameters and operating conditions. The test result showed that the system could detect and characterize tree canopy structure at very low travel speed(0.3 m/s) and high travel speed(5.0 m/s), respectively with acceptable accuracy.